利用光变曲线估计猎鹰九号火箭末级的旋转状态研究     

苏向泽  汤儒峰  李荣旺  李语强 《天文研究与技术》2021,(2):203-212

光度观测是地基观测空间目标的主要手段之一,利用光度信息能够估计空间目标的相关特征信息。为了更好地了解空间目标的旋转状态,选取具有代表性的猎鹰九号火箭末级作为研究对象,由其光变信息研究旋转状态。首先利用云南天文台1.2 m光学望远镜获取猎鹰九号火箭末级的光度数据,再对目标星等进行斜距归一化,得到目标光变信息并分析目标星等随时间变化的曲线,估计大致的旋转周期,再由相位离散最小化方法计算会合周期。根据太阳、目标和测站之间的位置关系、惯性主轴指向、旋转轴指向、初始相位等因素,采用姿态旋转矩阵计算理论星等,利用最小二乘原则确定惯性主轴方向及初相角度、旋转轴指向。最后给出了猎鹰九号火箭末级的旋转周期、会合周期以及旋转轴指向等参数,为后续开展其他空间目标光度信息研究提供参考。  相似文献   

敦煌-格尔木铁路沿线风动力环境特征     

鱼燕萍  张克存  安志山  张余 《中国沙漠》2020,40(1):41-48

敦煌-格尔木铁路沿线地形复杂、起沙因素多变、沙源丰富，沙害问题日益严重。目前对其风沙活动规律还未有研究，不利于防沙工作的开展。为此，通过对自北向南的5个观测点（S1、S2、S3、S4、S5）风速和风向的观测、计算和分析，利用平均风速、起沙风况及输沙势对敦格铁路沿线的风动力环境特征进行研究。结果表明：S5、S4和S3的风况对铁路风沙灾害防治意义较大。S5年平均风速、起沙风频率和输沙势最大，春季风沙活动最为强烈，且风向单一、风力强劲，风沙运动方向基本与铁路垂直，沙粒易在铁路附近堆积。S4夏季风沙活动最为强烈；S3春季风沙活动最为强烈，且风向单一，S4和S3的风沙运动方向与铁路夹角小于90°，附近沙源广阔，铁路易受风沙侵蚀，阻碍交通运营。  相似文献   

厚层切叠砂体自然层描述方法:以北一区断东葡一组1-4小层为例     

吴迪  马世忠  景丽娟  周志国 《世界地质》2020,39(1):106-112

将多期切叠河道砂体归类合并,建立一个“垂向连续,横向联通的表外砂岩空间体”(其中砂岩间夹层厚度≤0.4 m)的自然层概念来控制多期河道复合切叠厚砂体。以北一匹断东萄一组1-4小层为例,利用自然层间砂体厚度、切叠程度、测井曲线形态、相叠加类型及砂体叠加期次将自然层分为5类;再依据砂体间切叠位置、切叠程度和切叠形态的差异建立自然层剖面表征方法;依据砂体叠加期次,建立自然层在平面上表征模式。  相似文献   

A finite element approach for predicting the full resistance profile of a spudcan deeply penetrating in dense sand overlying clay     

《Applied Ocean Research》2019

This paper presents a finite element approach to calculate the full resistance profile of a spudcan deeply penetrating in dense sand overlying clay, in which a potential for an installing spudcan to experience a sudden uncontrolled punch-through failure exists. A modified Mohr-Coulomb model characterized by incorporating a four-phase variation of the mobilized strength and dilation parameters with an equivalent accumulated plastic strain is developed and tested for the overlying dense silica sand. An extended Tresca model is used for the strain softening of the underlying clay. A series of large deformation finite-element (LDFE) analyses are carried out, varying the strength and dilation parameters as well as the spudcan geometries. A fairly good performance of the present approach is verified by validating against groups of centrifuge tests data, allowing the numerical study to be extended parametrically. The four-phase variation of the mobilized strength and dilation parameters involved in the progressive failure of the upper dense sand is parametrically studied and extended to cover the range of sand relative densities that are of practical interest. Additionally, comparisons with the typical existing LDFE analyses using both simple and sophisticated constitutive models are carried out. It shows that the present approach performs fairly well to calculate the full resistance profile of a spudcan deeply penetration in both thin and thick dense sand overlying clay, especially the peak and post-peak resistance, within around 5% of the corresponding centrifuge tests results.  相似文献   

Effects of long-term cyclic horizontal loading on bucket foundations in saturated loose sand     

《Applied Ocean Research》2019

A 1-g model experimental study was conducted to investigate the accumulated rotations and unloading stiffness of bucket foundations in saturated loose sand. One-way horizontal cyclic loading was applied to model bucket foundations with embedment ratios 0.5 and 1.0. Up to 10⁴ cycles of loading were applied at a frequency of 0.2 Hz varying load amplitudes. The accumulated rotation of the bucket foundations increased with the number of cycles and the load amplitudes. Empirical equations were proposed to describe the accumulated rotation of the foundations. The unloading stiffness of foundations increased with the number of cycles but decreased with an increase in load amplitude. The initial unloading stiffness of L/D = 1.0 (L is skirt length; D is foundation diameter) was approximately twice that of L/D = 0.5. Excess pore water pressure difference of 50% was observed between L/D = 0.5 and 1.0. The suction and static capacity of the bucket increased with increase of bucket embedment ratio with a difference of 69.5% and 73.6% respectively between L/D = 0.5 and 1.0.  相似文献   

Mixed sand–mud bedforms produced by transient turbulent flows in the fringe of submarine fans: Indicators of flow transformation     

Megan L. Baker  Jaco H. Baas 《Sedimentology》2020,67(5):2645-2671

  相似文献   

Effect of sand on the vacuum consolidation of dredged slurry     

Jun Wang  Yuanqiang Cai  Xueyu Geng  Fengqi Xu 《Marine Georesources & Geotechnology》2018,36(2):238-244

Vacuum preloading is often used to improve the geotechnical properties of dredged slurry. Although the performance of this method has improved with rapidly developing technology, soil columns usually formed on the drainage boundary induce the decrease of permeability around the boundary, thereby limiting the further development of this method. To address this issue, this paper proposes a method for pretreating the slurry combined with sand prior to vacuum consolidation. This method partially replaces the fine particles with sand to reduce the formation of soil columns. Two groups of vacuum preloading tests were performed to investigate the effect of sand content and sand grain size on the vacuum consolidation of dredged slurry. The test results revealed that for a given sand grain size, increasing the sand content of the sand–slurry mixture increased the pore water drainage and accelerated the dissipation of pore water pressure, thereby increasing the vane shear strength. In contrast, for a constant sand content, the samples containing coarse sand exhibited increased pore water drainage and accelerated dissipation of pore water pressure, thereby increasing the vane shear strength of the soil.  相似文献   

Acoustic and petrophysical properties of mechanically compacted overconsolidated sands: Part 2 – Rock physics modelling and applications     

Sirikarn Narongsirikul  Nazmul Haque Mondol  Jens Jahren 《Geophysical Prospecting》2019,67(1):114-127

Part one of this paper reported results from experimental compaction measurements of unconsolidated natural sand samples with different mineralogical compositions and textures. The experimental setup was designed with several cycles of stress loading and unloading applied to the samples. The setup was aimed to simulate a stress condition where sediments underwent episodes of compaction, uplift and erosion. P-wave and S-wave velocities and corresponding petrophysical (porosity and density) properties were reported. In this second part of the paper, rock physics modelling utilizing existing rock physics models to evaluate the model validity for measured data from part one were presented. The results show that a friable sand model, which was established for normally compacted sediments is also capable of describing overconsolidated sediments. The velocity–porosity data plotted along the friable sand lines not only describe sorting deterioration, as has been traditionally explained by other studies, but also variations in pre-consolidation stress or degree of stress release. The deviation of the overconsolidated sands away from the normal compaction trend on the V_P/V_S and acoustic impedance space shows that various stress paths can be predicted on this domain when utilizing rock physics templates. Fluid saturation sensitivity is found to be lower in overconsolidated sands compared to normally consolidated sands. The sensitivity decreases with increasing pre-consolidation stress. This means detectability for four-dimensional fluid saturation changes can be affected if sediments were pre-stressed and unloaded. Well log data from the Barents Sea show similar patterns to the experimental sand data. The findings allow the development of better rock physics diagnostics of unloaded sediments, and the understanding of expected 4D seismic response during time-lapse seismic monitoring of uplifted basins. The studied outcomes also reveal an insight into the friable sand model that its diagnostic value is not only for describing sorting microtextures, but also pre-consolidation stress history. The outcome extends the model application for pre-consolidation stress estimation, for any unconsolidated sands experiencing similar unloading stress conditions to this study.  相似文献   

利用水系沉积物高程定量恢复古地貌的技术方法——以鲁西白彦地区白彦砾岩为例          下载免费PDF全文

程光锁  于学峰  杨斌  胡戈  李兆营  周军  刘卫东  罗文强  马祥县 《山东国土资源》2019,35(9)

主要分析了构造抬升对水系和地形的影响和恢复,以从古生代灰岩围岩中大面积但零星出露的岩溶砾岩点为研究对象,对区域古水系和地形地貌恢复和反演做出了新的尝试。在收集资料和实测的基础上,尝试性探讨了利用稳定水体参照物高程反演抬升高度以及邻区山峰点的古高程、古水系,恢复区域上古地形地貌的技术方法。并以白彦地区为例,通过白彦岩溶砾岩的分布、产状、金刚石矿物含量、岩性等地质特征,恢复白彦地区古地形线、古水系位置和流向等古地理地貌,指出在白彦期时代,该区总体发育4个水系,邹城市大石墙水系、枣庄水系、平邑水系、费县水系,水系中金刚石含量较为丰富的砾岩点大多分布在凤凰山隆起中心,其中在平邑水系推测存在一个山地峡谷中的古湖泊。认为蒙山凸起中已知的常马庄地区的金伯利岩脉所含有金刚石可能主要供应平邑区水系,其他3个地区水系的金刚石可能来源于凤凰山及其东部隆起剥蚀地区。  相似文献   

Numerical study of sand scour with a modified Eulerian model based on incipient motion theory     

Qingqing Yuan  Min Zhao  Tong Ge 《Marine Georesources & Geotechnology》2018,36(7):818-826

Application of the standard Eulerian model to simulations of sand scour results in unrealistic phenomena. Therefore, the present work develops a modified Eulerian model based on sand incipient motion theory. The modified model is applied for simulating a two-dimensional single vertical jet and a moving planar jet. The simulation results generally demonstrate fairly good agreement with published results of scour profiles and the velocity contours of the water and sand phases. In addition, equations to describe self-similar scour profiles for the moving planar jet cases are given. The results demonstrate that the modified model efficiently and accurately simulates the two-dimensional sand scour produced by jets, particularly for the moving jet cases.  相似文献